BASIC REQUIREMENTS FOR THE INSTALLATION OF GRAVEL AND MASTIC EXPANSION JOINTS ON BRIDGE STRUCTURES
Abstract
The article deals with the technological process of arranging crushed stone and mastic expansion joints on bridges, which are important elements for ensuring stable and safe operation of bridge structures. The main attention is paid to the peculiarities of using crushed stone and mastic materials that provide high elasticity, strength and waterproofing, which allows compensating for deformations caused by mechanical loads and temperature fluctuations.
The article describes the stages of such joints, starting from the preparation of the base to the laying of materials, and also notes the importance of choosing the right components for the production of crushed stone and mastic mixtures. The basic requirements for materials, such as crushed stone, mastics and special additives, which ensure long-term operation of the joints even in difficult climatic conditions, are considered.
The article pays special attention to the technology of laying crushed stone mastic joints, which includes thorough cleaning of the joint, uniform distribution of materials, and control over their quality during installation. Technological procedures are described, such as the use of primers to improve adhesion, reinforcement of joints to increase their mechanical properties, as well as checking the tightness and strength after the work is completed.
In general, the article contributes to a deeper understanding of the technology of arranging crushed stone-mastic expansion joints, which is an important tool for ensuring the safety and durability of bridge structures.
References
SOU 42.1-37641918-111:2014 Transport structures. Expansion joints of road bridges. Requirements for selection and installation.
DBN B.2.3-22:2009 Bridges and pipes. Basic design requirements.
Kushnir O. V., Koval P. M., Bodnar L. P., Panibratets L. G. Operation of asphalt concrete pavement in the zone of adjacency of expansion joints on road bridges. Roads and bridges. Kyiv, 2015. Issue 15. С. 87-93.
Zusaetzliche Technische Vertragsbedingungen und Richtlinien fuer Ingenieurbauten (ZTV -ING). Teil 8. Bauwerksausstattung. Abschnitt 2. Fahrbahnuebergaenge aus Asphalt. Ausgabe 2003, Bundesanstalt fuer Strassenwesen, Deutschland. (Additional technical standards for contracting and guidelines for construction products. Part 8: Construction equipment. Section 2. Asphalt expansion joints.
Structural bearings and expansion joints for bridges. Structural Engineering Documents 6 / G. Ramberger. –Switzerland , Zurich : IABSE, 2002. –P. 51-89.
NDOT structures manual. Chapter 19. Expansion joints / Nevada Department of Transportation. -Carson City, Nevada, USA, 2008. –10 p.
DBN B.2.3-14:2006 Transport facilities. Bridges and pipes. Design rules.
DSTU B V.2.7-79-98 Butyl rubber and bitumen-butyl rubber waterproofing mastics. Technical conditions.
DSTU 9177-2:2022 Crushed stone and gravel materials for road construction. Technical specifications. Part 2. Unreinforced materials.
DSTU B V.2.7-34-2001 Construction materials. Crushed stone for construction works from rocky rocks and wastes of dry magnetic beneficiation of ferruginous quartzite from mining and processing plants and mines of Ukraine. Technical specifications.
DSTU B V.2.7-74-98 Construction materials. Coarse aggregates of natural, industrial waste and artificial origin for building materials, products, structures and works. Classification. Amended.
DSTU B V.2.7-75-98 Construction materials. Dense natural crushed stone and gravel for building materials, products, structures and works. Technical conditions.
DSTU B V.2.7-242:2010 Sealing gaskets for windows and doors. General technical conditions.
DSTU B V.2.7-83:2014 Rolled roofing and waterproofing materials. Test methods.
DSTU 4747:2007 (GOST 103-2006) Hot-rolled steel sections for staffs. Product mix (EN 10058:2003, NEQ). With amendments.
DSTU 4044:2019 Petroleum road viscous bitumen. Technical conditions.
DSTU B V.2.7-79-98 Butyl rubber and bitumen-butyl rubber waterproofing mastics. Technical conditions.
DSTU 4148-2003 Petroleum bitumen for construction. Technical conditions. Amendment № 1.
DSTU 3868-99 Diesel fuel. Technical conditions.
DSTU 3760:2019 Reinforcing bars for reinforced concrete structures. General technical conditions.
Views:
12
Downloads:
10
Copyright (c) 2025 Vladyslav Vynogradov, Onyshchenko Artur Mykolayovych, Mirchuk Iryna Olehivna
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles are published in open-access and licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0). Hence, authors retain copyright to the content of the articles.
CC BY 4.0 License allows content to be copied, adapted, displayed, distributed, re-published or otherwise re-used for any purpose including for adaptation and commercial use provided the content is attributed.
