PROVISIONAL RESTORATIONS IN RESTORATIVE DENTISTRY
Abstract
Provisional restorations are of a great significance in fixed prosthodontic rehabilitation, particularly in case long-term treatment is needed before final prosthetics. The restorations are also important from the point of view of diagnosis and treatment plan assessment so they should be similar to the final constructions in their shape and function. Provisional restorations quite often need alterations and adjustment to the new requirements, so it’s important to comprehend the compositional properties of the base and repair materials to make a reliable bond between them. Thus, interim treatment should meet a number of requirements such as biocompatibility, marginal adaptation, strength and longevity. The purpose of this review is to discuss fabrication technology of provisional restorations, possible failure and complications, the ways to correct them as well as the aspects of relining provisional restoration.
References
Glossary of Prosthodontic Terms 8th ed. J Prosthet Dent 2005; 94:10-92.
Al Jabbari YS, Al-Rasheed A, Smith JW, Iacopino AM. An indirect technique for assuring simplicity and marginal integrity of provisional restorations during full mouth rehabilitation. Saudi Dental Journal 2013; 25:39-42.
Luthardt RG, Stossel M, Hinz M, Vollandt R. Clinical performance and periodontal outcome of temporary crowns and fixed partial dentures: a randomized clinical trial. J Prosthet Dent 2000; 83:32–9.
Patras M, Naka O, Doukoudakis S, Pissiotis A. Management of Provisional Restorations’ Deficiencies: A Literature Review. Journal of Esthetic and Restorative Dentistry 2011:1-13.
Regish KM, Sharma D, Prithviraj DR. Techniques of Fabrication of Provisional Restoration: An Overview. International Journal of Dentistry 2011; 134659.
Ayuso-Montero, R., Martinez-Gomis, J., Lujan-Climent, M., Salsench, J. and Peraire, M. (2009) Influence of Matrix Type on Surface Roughness of Three Resins for Provisional Crowns and Fixed Partial Dentures. Journal of Prosthodontics, 18, 141-144.
Guler A.U., Kurt S. and Kulunk T. (2005) Effects of Various Finishing Procedures on the Staining of Provisional Restorative Materials. The Journal of Prosthetic Dentistry, 93, 453-458.
Christensen GJ. The fastest and best provisional restorations. J Am Dent Assoc 2003; 134:637–9.
Sen, D., Göller, G. and Issever, H. (2002) The Effect of Two Polishing Pastes on the Surface Roughness of Bis-Acryl Composite and Methacrylate-Based Resins. The Journal of Prosthetic Dentistry, 88, 527-532.
Michalakis K, Pissiotis A, Hirayama H, et al. Comparison of temperature increase in the pulp chamber during the polymerization of materials used for the direct fabrication of provisional restorations. J Prosthet Dent 2006; 96:418–23.
Klages U, Bruckner A, Zentner A. Dental esthetics, self-awareness, and oral health-related quality of life in young adults. Eur J Orthod 2004; 26:507–14.
Young CW. A simple and predictable direct technique for esthetic provisional veneers. J Calif Dent Assoc. 2004;32(2):178–183
Singla M, Padmaja K, Arora J, Shah A. Provisional Restorations in Fixed Prosthodontics: A Review. Int J Dent Med Res 2014;1(4):148-151.
H. B. Dumbrigue, “Composite indirect-direct method for fabricating multiple-unit provisional restorations,” Journal of Prosthetic Dentistry, vol. 89, no. 1, pp. 86–88, 2003.
Burns, D.R, Beck, D.A. and Nelson, S.K. (2003) A Review of Selected Dental Literature on Contemporary Provisional Fixed Prosthodontic Treatment: Report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. The Journal of Prosthetic Dentistry, 90, 474-497.
Bennani V. Fabrication of an indirect-direct provisional fixed partial denture. J Prosthet Dent. 2000; 84:364–365
Hammond BD, Cooper JR, Lazarchik DA. Predictable repair of provisional restorations. J Esthet Restor Dent 2009; 21:19–25.
Buergers, R., Rosentritt, M. and Handel, G. (2007) Bacterial Adhesion of Strept ococcus mutans to Provisional Fixed Prosthodontics Material. The Journal of Prosthetic Dentistry, 98, 461-469.
Kuhar, M. and Funduk, N. (2005) Effects of Polishing Techniques on the Surface Roughness of Acrylic Denture Base Resins. The Journal of Prosthetic Dentistry, 93, 76-85.
Rüttermann S., Bergmann N., Beikler T., Raab W.H. and Janda R. (2012) Bacterial Viability on Surface-Modified Resin-Based Dental Restorative Materials. Archives of Oral Biology, 57, 1512-1521.
Edelhoff D, Spiekermann H, Yildirim M. A review of esthetic pontic design options. Quintessence Int 2002; 33:736–46.
Kim TH, Cascione D, Knezevic A. Simulated tissue using a unique pontic design: a clinical report. J Prosthe tDent 2009; 102:205–10.
Young HM, Smith CT, Morton D. Comparative in vitro evaluation of two provisional restorative materials. J Prosthet Dent 2001; 85:129–32.
Ehrenberg DS, Weiner S. Changes in marginal gap size of provisional resin crowns after occlusal loading and thermal cycling. J Prosthet Dent 2000; 84:139–48.
Ehrenberg D, Weiner GI, Weiner S. Long-term effects of storage and thermal cycling on the marginal adaptation of provisional resin crowns: a pilot study. J Prosthet Dent 2006;95:230–6.
Chen HL, Lai YL, Chou IC, et al. Shear bond strength of provisional restoration materials repaired with light-cured resins. Oper Den 2008; 33:508–15
Burns DR, Beck DA, Nelson SK. A review of selected dental literature on contemporary provisional fixed prosthodontics treatment: report of the committee on research in fixed prosthodontics of the academy of fixed prosthodontics. J Prosthet Dent 2003; 90:474–97.
Haselton DR, Diaz-Arnold AM, Vargas MA. Flexural strength of provisional crown and fixed partial denture resins. J Prosthet Dent 2002; 87:225–8.
Hagge MS, Lindemuth JS, Jones A. Shear bond strength of bis-acryl composite provisional material repaired with flowable composite. J Esthet Restor Dent 2002; 14:47–52.
Appleby DC. Repair of fractured connectors in a provisional fixed partial denture. J Prosthet Dent 2001; 86:449–50.
Views:
1239
Downloads:
1094
Copyright (c) 2019 The authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles are published in open-access and licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0). Hence, authors retain copyright to the content of the articles.
CC BY 4.0 License allows content to be copied, adapted, displayed, distributed, re-published or otherwise re-used for any purpose including for adaptation and commercial use provided the content is attributed.
