REQUIREMENTS FOR METHYL METHACRYLATE-BASED MIXTURES: APPROACHES TO QUALITY ASSURANCE
Abstract
The article presents the requirements for polymer mixtures made on the basis of methyl methacrylate for the arrangement of thin-layer pavements of the bridge deck. The pavement on bridges is an important structural element of the structure, the condition of which affects the overall safety of the entire structure.
Given the constant increase in traffic volume and the load on the street network, materials that guarantee reliable operation of the roadway of bridge structures should be used to increase the durability of road surfaces.
Road pavement is a key structural element for ensuring the safety and comfort of vehicular traffic, in particular due to its flatness, low noise level and roughness, which guarantees the proper coefficient of adhesion to the tires of vehicles while driving. However, it should be noted that during operation, such a coating is easily exposed to
negative factors that lead to its premature deformation.
References
ACI 548.10-10 — Specification for Type MMS (Methyl Methacrylate Slurry) Polymer Overlays for Bridge and Parking Garage Decks.
DIN 16945:1989-03 Testing of resins, hardeners and accelerators, and catalyzed resins.
EN 14889-2:2006 Fibres for concrete — Part 2: Polymer fibres — Definitions, specifications and conformity.
DSTU 4153-2003 Solid petroleum waxes. Technical specifications.
DSTU ISO 3262-1:2020 (ISO 3262-1:2020, IDT) Fillers for paints. Specifications and test methods. Part 1: Introduction and general test methods.
DSTU ISO 3262-13:2020 (ISO 3262-13:1997, IDT) Fillers for paints. Specifications and test methods. Part 13. Natural quartz (ground).
DSTU ISO 3262-21:2020 (ISO 3262-21:2000, IDT) Fillers for paints. Specifications and test methods. Part 21: Quartz sand (unground natural quartz).
DSTU B V.2.7-32-95 Building materials. Natural dense sand for building materials, products, structures and works. Technical conditions.
DSTU B B.2.7-210:2010 Construction materials. Sand from crushing of igneous rocks for construction works. Technical conditions.
DSTU B V.2.7-33-2001 Construction materials. Quartz-iron sand and fine fraction for construction works from the waste of mining and processing plants of Ukraine. Technical conditions.
DSTU B V.2.7-39-95 Crushed stone and sand from ferrous and non-ferrous metallurgy slag for concrete. Technical conditions
DSTU B V.2.7-76-98 Sand for building rocks from rock detailing screenings of mining and processing plants of Ukraine. Technical conditions.
DSTU B V.2.7-157:2011 Construction materials. Perlite sand and crushed stone swollen. Technical conditions.
DSTU B V.2.7-166:2008 Crushed stone and sand from porous rocks. Technical specifications.
DSTU EN 13055-1:2019 Lightweight aggregates. Part 1: Lightweight aggregates for concrete and mortar (EN 13055-1:2002, IDT). With amendment No. 1: 2019.
DSTU ISO 2114:2014 Plastics (polyester resins) and paints and varnishes (binders). Method for the determination of partial and total acid number (ISO 2114:2000, IDT).
DSTU ISO 2535:2014 Plastics. Unsaturated polyester resins. Method for determination of gelation time at ambient temperature (ISO 2535:2001, IDT).
DSTU ISO 2554:2014 Plastics. Unsaturated polyester resins. Method for determination of hydroxyl number (ISO 2554:1997, IDT)
DSTU EN 16074:2015 Paints and varnishes. Determination of the content of non-volatile substances and surface coverage of materials for painting coiled metal (EN 16074:2011, IDT).
DSTU B B.2.7-232:2010 Construction materials. Sand for construction works. Test methods.
DSTU B V.2.7-214:2009 Concretes. Methods for determination of strength by control samples.
DSTU EN 1015-11:2022 Test methods for masonry mortar. Part 11: Determination of flexural and compressive strength of hardened mortar (EN 1015-11:2019, IDT).
DSTU 8746:2017 Roads. Methods for measuring the adhesion properties of the road surface.
DSTU B V.2.7-47-96 Construction materials. Concretes. Methods for determining frost resistance. General requirements.
DSTU B V.2.7-49-96 Construction materials. Concretes. Accelerated methods for determination of frost resistance at repeated freezing and thawing.
DSTU B B.2.7-170:2008 Construction materials. Concretes. Methods for determination of average density, moisture content, water absorption, porosity and water resistance.
DSTU B V.2.7-187:2009 Construction materials. Cements. Methods for determination of flexural and compressive strength.
DSTU B V.2.7-212:2009 Construction materials. Concretes. Methods for determining abrasion.
DSTU ISO/TR 7620:2019 (ISO/TR 7620:2005, IDT) Rubber materials. Chemical resistance.
DSTU B GOST 28574:2011 Corrosion protection in construction. Concrete and reinforced concrete structures. Methods of testing the adhesion of protective coatings (GOST 28574-90, IDT).
DSTU ISO 4624:2019 Paints and varnishes. Determination of adhesion by the tear-off method (ISO 4624:2016, IDT).
ASTM D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers.
DSTU B B.2.7-29-95 Construction materials. Fine aggregates of natural, industrial waste and artificial origin for building materials, products, structures and works. Classification. Amended.
Views:
29
Downloads:
13
Copyright (c) 2024 Iryna Mirchuk, Oleksandr Fedorenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles are published in open-access and licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0). Hence, authors retain copyright to the content of the articles.
CC BY 4.0 License allows content to be copied, adapted, displayed, distributed, re-published or otherwise re-used for any purpose including for adaptation and commercial use provided the content is attributed.
